Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
642
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR ARP TRAFFIC
clear arp traffic [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to clear the ARP statistics counters.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# clear arp traffic ALU-vrf
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name If the VRF name is specified, it clears the
ARP statistics for the specified VRF, else
for the default VRF.
To Next Page
Loading...
Need help?
General
