Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
94
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
RELOAD FACTORY DEFAULTS
reload factory defaults
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
reload OmniAccess 5740 USG with the factory default configuration. When this
command is executed, the startup configuration is erased, and the chassis is
rebooted with the factory default configuration.
PARAMETERS
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# reload factory defaults
System will boot with factory default configuration
ALL current config will be lost
Do you really want to continue (y/[n])?
RELEASE HISTORY
Release 3.0: command was introduced.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English