Alcatel-Lucent OmniAccess 5740 - Show Eth-Cfm Mep - Remote-Mepid

show eth-cfm mep - remote-mepid
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
371
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW ETH-CFM MEP - REMOTE-MEPID
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535> {remote-mepid <1-8191>|all-remote-mepids}
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays the MEP, MA's, MD's, remote MEP IDs.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100 all-remote-meps
---------------------------------------------------------------
Eth-CFM Remote-Mep Table
---------------------------------------------------------------
R-mepId Rx-CC Rx-Rdi Port-Tlv If-Tlv Peer Mac Addr CCM status since
---------------------------------------------------------------
100 False True Absent Absent 0E0.B1B2.539C Fri Jan 2 02:31:49 1970
20 False True Absent Absent 0E0.B1C6.3CBC Fri Jan 2 02:31:49 1970
200 False True Absent Absent 011.8B 2.7911 Fri Jan 2 02:31:49 1970
---------------------------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.
remote-mepid <1-8191> An integer, unique over a given MA,
identifying a remote MEP. Displays
information on the specific remote MEP.
all-remote-mepids Displays information on all the remote
MEPs.