Alcatel-Lucent OmniAccess 5740 - Auto Qos Diff-Serv; Auto Qos Template

Quality of Service
Left running head:
Chapter name (automatic)
884
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
AUTO QOS DIFF-SERV
auto qos diff-serv
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
enables Auto QoS Diff-Serv on an interface (assured forwarding and expedited
forwarding).
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config-if Serial0/1:3)# auto qos diff-serv
AUTO QOS TEMPLATE
auto qos template {diff-serv|voip} <policy-map name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
creates an Auto QoS VoIP/Diff-serv template policy.
This policy is to be attached to an interface using the ‘service policy command’.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# auto qos template voip p1
Parameter Description
policy-map name Name of the policy map.