show vlan
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
381
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW VLAN
show vlan {Brief|id <1-4094>}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the configuration of the VLANs configured.
PARAMETERS
EXAMPLE
ALU(config)# show vlan Brief
VLAN_ID Interface name Mode
--------- ----------------- --------
5 switchport3 Access
Serial0/0 Trunk
10 switchport0 Access
Serial0/0 Trunk
1 switchport1 No-Mode
switchport2 No-Mode
Parameter Description
Brief Displays all the VLANs that are configured on
OmniAccess 5740 USG.
id Displays the configuration for a specific VLAN.
To Next Page
Loading...
