Alcatel-Lucent OmniAccess 5740 - No Time-Range; Show Time-Range; Time-Range

Filter and Firewall
Left running head:
Chapter name (automatic)
742
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO TIME-RANGE
no time-range <name>
This command is entered in the Configuration Mode. This command is used to
delete a specific time-range.
SHOW TIME-RANGE
show time-range [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view information of all the time-range configured on the
system or a specific time-range.
PARAMETERS
EXAMPLE
If “t1” is a schedule, then to view the particulars in it, use the following command:
ALU# show time-range
time-range t1
absolute 10:10:10 5/6/2006
TIME-RANGE
time-range <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a time-range object that can be used across applications.
PARAMETERS
EXAMPLE
ALU(config)# time-range t1
ALU(config-time-range-t1)#
Parameter Description
name Time-range name.
Parameter Description
name Name of the time-range.