bgp cluster-id
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
497
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
BGP CLUSTER-ID
bgp cluster-id {<1-4294967295>|<ip-address>}
DESCRIPTION
This command is entered in the Router Configuration Mode. This command can
be used to configure the cluster ID if the BGP cluster has more than one route
reflector.
PARAMETERS
DEFAULT VALUE
Router ID of the route reflector is used as the Cluster ID.
EXAMPLE
ALU(config-router bgp AS30)# bgp cluster-id 50
BGP CONFEDERATION IDENTIFIER
bgp confederation identifier <1-65535>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command can
be used to specify a BGP confederation identifier.
PARAMETERS
D
EFAULT VALUE
No confederation identifier is configured.
EXAMPLE
ALU(config-router bgp AS30)# bgp confederation identifier 56687
Parameter Description
1-4294967295 Cluster-ID of the router acting as a route-reflector.
ip-address Route-reflector cluster ID in IP address format.
Parameter Description
1-65535 Autonomous system number that internally includes
multiple autonomous systems.
To Next Page
Loading...
Need help?
General
