ip ospf priority
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
567
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP OSPF PRIORITY
ip ospf priority <0-255>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to set the router priority, which helps determine the designated router for this
network.
PARAMETERS
DEFAULT VALUE
The default OSPF interface priority is 1.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# ip ospf priority 2
Parameter Description
0-255 A number value that specifies the priority of the router.
To Next Page
Loading...
Need help?
General
