Alcatel-Lucent OmniAccess 5740 - Neighbor Capability; Neighbor Default-Originate

neighbor capability
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
511
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NEIGHBOR CAPABILITY
neighbor {<ip-address>|<peer-group-name>} capability graceful-
restart
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command advertises graceful-restart capability to a particular neighbor.
PARAMETERS
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 capability
graceful-restart
NEIGHBOR DEFAULT-ORIGINATE
neighbor {<ip-address>|<peer-group-name>} default-originate
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command allows a BGP speaker (the local router) to originate a default route
to a neighbor.
PARAMETERS
DEFAULT
No default route is sent to the neighbor.
EXAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 default-originate
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.