show firewall alg tftp statistics
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
749
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FIREWALL ALG TFTP STATISTICS
show firewall alg tftp statistics
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the TFTP ALG statistics.
PARAMETERS
None.
EXAMPLE
ALU(config)# show firewall alg tftp statistics
Total SNAT Write commands : 0
Total DNAT Write commands : 0
Total Filter Write Commands : 0
Total SNAT Read Commands : 0
Total DNAT Read Commands : 0
Total Filter Read commands : 0
Total Pinholes created : 0
Total Pinholes matched : 0
Total Pinholes timed out : 0
Total Pinholes failed : 0
TCP ANY ANY SERVICE
tcp any any service {dns|ftp|nfs|sip|rtsp}
DESCRIPTION
This command is entered in the Match-list mode. This command is used to enable
DNS, FTP, NFS, RPC-Portmap, RTSP or SIP ALG.
PARAMETERS
EXAMPLE
ALU(config)# match-list m1
ALU(config-match-list-m1)# tcp any any service dns
Parameter Description
dns|ftp|nfs|sip|rtsp Type of ALG service.