Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
358
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO CCM-INTERVAL
no ccm-interval [10m|10s|1m|1s]
This is entered in the OAM Domain Association Configuration Mode. This
command is used to delete the configured CCM interval and reset it to the default
value. The default CCM interval is 1 second.
NO ETH-AIS INTERVAL
no ais-interval {1s|60s}
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to delete the configured AIS interval and reset it to the default.
The default AIS interval is 1 second.
NO ETH-CFM DOMAIN
no eth-cfm domain <0-65535> [name {dns <dns-name>|mac <mac-
address>|string <string>} <md-name> level <0-7>]
This is entered in the OAM Configuration Mode. This command is used to delete a
maintenance domain.
Note: You cannot delete a MD if its associated with a MA. First delete the MA to delete the
MD.
NO ETH-CFM ASSOCIATION
no eth-cfm association <0-65535> domain <0-65535> [assocName
{id <0-65535>|string <string>|vlan <0-4096>|vpnid <0-65535>}]
This is entered in the OAM Configuration Mode. This command is used to delete a
maintenance association from a maintenance domain.
Note: You cannot delete a MA if its associated with a MEP. First delete the MEP to delete the
MA.
NO FAULT-ALARM LOWEST-PRIORITY-DEFECT
no fault-alarm lowest-priority-defect [<1-6>]
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to delete the configured lowest priority fault alarm value and
reset it to the default. The default lowest priority defect value is 2.
To Next Page
Loading...
Need help?
General
