Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Multilink Frame Relay
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
329
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CHAPTER 18 MULTILINK FRAME RELAY
This chapter documents the Command Line Interface (CLI) commands for the
Multilink Frame Relay Protocol (MLFR). These commands are used to configure
Multilink Frame Relay encapsulation on a T1 or E1 interface or a Serial (V.35/
X.21) interface.
This chapter includes table of parameters, default values, and configuration
examples for MLFR configurations as quick-start and reference information. All
the commands are described in alphabetical order
. For more detailed
information about using and configuring the Multilink Frame Relay Protocol, refer
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English