Alcatel-Lucent OmniAccess 5740 - Mlfr Bid; Mlfr Hello Interval

mlfr bid
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
333
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
MLFR BID
mlfr bid <name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
assigns a bundle identification (BID) name to the bundle interface.
PARAMETERS
EXAMPLE
ALU(config-if mlfr100)# mlfr bid alu1
MLFR HELLO INTERVAL
mlfr hello-interval <1-180>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
configures the hello interval.
PARAMETERS
DEFAULT VALUE
Default value is 10 seconds.
EXAMPLE
ALU(config-if Serial0/0:0)# mlfr hello-interval 15
Parameter Description
name Bundle Identification Name (BID) that is
associated with the bundle interface.
The bid name can be a maximum of 255
characters.
Parameter Description
1-180 Hello interval in seconds. The range of
this interval is from 1 to 180 seconds.