Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
812
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DYNAMIC MULTIPOINT VIRTUAL PRIVATE NETWORK (DMVPN)
CLI C
OMMANDS
This section deals with the commands relevant to DMVPN configuration on
OmniAccess 5740 USG.
AUTHENTICATION
authentication <string>
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to configure authentication string for NHRP.
All devices configured with NHRP within one logical NBMA network must share
the same authentication string.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-nhrp-alu-dmvpn)# authentication alu123
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
string Specify the authentication string for
NHRP.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English