option ntp server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
941
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
OPTION NTP SERVER
option ntp-server <ip-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the IP address of the Network Time Protocol server to be
used by the clients.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option ntp-server 1.1.1.1
OPTION ROUTERS
option routers <ip-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the router in the subnet for which the DHCP is configured.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option routers 1.1.1.1
Parameter Description
ip-address IP address of the Network Time Protocol
server.
Parameter Description
ip-address IP address of the router.