show vrrp all
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
159
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW VRRP ALL
show vrrp all [brief]
DESCRIPTION
This command is entered in the Super User Mode, Configuration Mode or
Interface Configuration Mode. This command displays a brief or detailed status of
all the VRRP groups configured on the OmniAccess 5740 USG.
PARAMETERS
EXAMPLE
ALU(config-if GigabitEthernet3/0)# show vrrp all
Interface GigabitEthernet3/0 - Group 1
State is Master
Virtual IP address is 10.1.1.1
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 255
Master Router is 10.1.1.1 (local), priority is 255
Master Advertisement interval is 1.000 secs
Master Down interval is 3.000 secs
Interface GigabitEthernet3/0 - Group 2
State is Master
Virtual IP address is 20.1.1.1
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 100
Master Router is 10.1.1.1 (local), priority is 100
Master Advertisement interval is 1.000 secs
Master Down interval is 3.000 secs
Parameter Description
all This keyword displays a detailed information on all the
VRRP groups.
brief Displays a brief information on all the VRRP groups.
To Next Page
Loading...
Need help?
General
