Alcatel-Lucent OmniAccess 5740 - Parameter-Req-List

parameter-req-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
961
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PARAMETER-REQ-LIST
parameter-req-list {bootfile-name|classless-static-routes
|lease-time|ntp-server|rebinding-time|renewal-time|routers
|server-identifier|sip-server|subnet-mask|tftp-server-addr
|tftp-server-name|vendor-specific}
DESCRIPTION
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to create a DHCP parameter request list option. You can
configure request for multiple DHCP options in the list.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–dhcp-client-client1)# parameter-req-list bootfile-
name
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
bootfile-name|classless-
static-routes |lease-time|ntp-
server |rebinding-time
|renewal-time |routers|server-
identifier|sip-server|subnet-
mask|tftp-server-addr|tftp-
server-name|vendor-specific
Specify the DHCP option to be obtained
from the server in the parameter-req-list.