Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

802.1X Port-Based Authentication
Left running head:
Chapter name (automatic)
222
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO DOT1X HOST-MODE
no dot1x host-mode
This command is entered in the Interface Configuration Mode. This command
disables multiple hosts/multiple authentication mode on the port, and resets to
‘single host mode’, which is the default.
NO DOT1X MAX-REQUEST
no dot1x max-request [<1-10>]
This command is entered in the Interface Configuration Mode. This command
sets the max-request to its default, which is 2.
NO DOT1X PORT-CONTROL
no dot1x port-control [auto|forced-authorized|forced-
unauthorized]
This command is entered in the Interface Configuration Mode. This command is
used to disable 802.1X port-based authentication on the L2 interface, and resets
to its default.
NO DOT1X REAUTHENTICATION
no dot1x reauthentication
This command is entered in the Interface Configuration Mode. This command is
used to disable periodic reauthentication of the client.
NO DOT1X SYSTEM-AUTH-CONTROL
no dot1x system-auth-control
This command is entered in the Configuration Mode. This command is used to
disable 802.1X port-based authentication globally.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English