Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

passive-interface default
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
443
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PASSIVE-INTERFACE DEFAULT
passive-interface default
DESCRIPTION
This command is entered in the Router Configuration Mode. This command sets
all interfaces as passive by default.
PARAMETERS
DEFAULT VALUE
By default, all interfaces are active.
EXAMPLE
ALU(config-router ospf1)# passive-interface default
Parameter Description
default All interfaces become passive.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English