no frame-relay keepalive
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
283
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO FRAME-RELAY KEEPALIVE
no frame-relay keepalive
This command is entered in the Interface Configuration Mode. The “no” command
resets the FR LMI keep alive interval to ‘0’.
NO FRAME-RELAY LMI-TYPE
no frame-relay lmi-type
This command is entered in the Interface Configuration Mode. The “no” command
resets the LMI type to its default value. The default LMI type is auto-sense.
NO FRAME-RELAY LMI-N391DTE
no frame-relay lmi-n391dte
This command is entered in the Interface Configuration Mode. The “no” command
sets the polling interval to its default value, which is 6.
NO FRAME-RELAY LMI-N392DTE
no frame-relay lmi-n392dte
This command is entered in the Interface Configuration Mode. The “no” command
sets the lmi-n392dte to its default value, which is 3.
NO FRAME-RELAY LMI-N393DTE
no frame-relay lmi-n393dte
This command is entered in the Interface Configuration Mode. The “no” command
sets the lmi-n393dte to its default, which is 4.
To Next Page
Loading...
