Alcatel-Lucent OmniAccess 5740 - Show Ip Pim Interface

Multicast Routing
Left running head:
Chapter name (automatic)
616
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP PIM INTERFACE
show ip pim interface [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows the interfaces on which PIM is enabled, and details like interface
DR priority and current DR on the interface is displayed.
PARAMETERS
EXAMPLE
ALU# show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
3.3.3.4 GigabitEthernet3/0 v2/S 0 30 1 3.3.3.4
4.4.4.4 GigabitEthernet3/1 v2/S 0 30 1 4.4.4.4
8.8.8.7 Serial0/0:0 v2/S 1 30 1 8.8.8.8
6.6.6.6 Serial0/1:0 v2/S 1 30 1 6.6.6.7
ALU#
ALU# show ip pim interface GigabitEthernet 3/0
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
3.3.3.4 GigabitEthernet3/0 v2/S 0 30 1 3.3.3.4
ALU#
Parameter Description
interface-name Name of the interface.