Border Gateway Protocol
Left running head:
Chapter name (automatic)
512
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR DESCRIPTION
neighbor {<ip-address>|<peer-group-name>} description <line>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command can
be used to associate a description to a neighbor.
PARAMETERS
DEFAULT
There is no description of the neighbor.
EXAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 description
linktoisp1
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
line Descriptive text (up to 80 characters) that describes the
neighbor.
To Next Page
Loading...
Need help?
General
