show licenses
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1007
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW LICENSES
show licenses [<license-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the list of all the available licenses on the system, the file from
which it was installed, license ID, features, attributes, validity and status
information.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU# show licenses
1. License for feature IPSEC is valid.
* License : testipsec5740.lic
* Issued on : Thu Aug 21 11:53:20 2008
* Chassis ID: WL0537000214
* Serial num: 3
* Details : IP Security Encryption
* Attributes: Name Value
-------- -------
VALIDITY UNLIMITED
2. License for feature IDS-UPDATE is valid.
* License : ipsec5740.lic
* Issued on : Thu Aug 21 11:53:20 2008
* Chassis ID: WL0537000214
* Serial num: 2
* Details : Intrusion Detection System Update
* Attributes: Name Value
-------- -------
VALIDITY UNLIMITED
3. License for feature IDS is valid.
* License : ipsec5740.lic
* Issued on : Thu Aug 21 11:53:20 2008
* Chassis ID: WL0537000214
* Serial num: 1
* Details : Intrusion Detection System
* Attributes: Name Value
-------- -------
Parameter Description
license-name If a license file name is specified, then
the details of only the licenses present in
that file is displayed.