Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Filter and Firewall
Left running head:
Chapter name (automatic)
750
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
UDP ANY ANY SERVICE
udp any any service {dns|nfs|sip|tftp}
DESCRIPTION
This command is entered in the Match-list mode. This command is used to enable
DNS, NFS, RPC-Portmap, TFTP, or SIP ALG.
PARAMETERS
EXAMPLE
ALU(config)# match-list m1
ALU(config-match-list-m1)# udp any any service sip
Parameter Description
dns|nfs|sip|tftp Type of ALG service.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English