Alcatel-Lucent OmniAccess 5740 - Show Frame-Relay Pvc

Link Fragmentation and Interleaving (LFI)
Left running head:
Chapter name (automatic)
394
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FRAME-RELAY PVC
show frame-relay pvc
DESCRIPTION
TThis command is entered in the Super User Mode, Configuration Mode or
Interface Configuration Mode. his command displays the fragmentation and
reassembly statistic per PVC.
PARAMETERS
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show frame-relay pvc
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = STATIC, INTERFACE = Serial0/
0:0
…………
End-to-End Fragmentation Statistics
Packets fragmented 10
Fragments Created 220
fragments failed 0
End-to-End Reassembly Statistics
fragments received 220
fragments reassembled 220
fragments dropped 0
fragments timeout 0
fragments reordered 0
DLCI = 110, DLCI USAGE = LOCAL, PVC STATUS = STATIC, INTERFACE = Serial0/
0:0.1
…………
End-to-End Fragmentation Statistics
Packets fragmented 10
Fragments Created 220
fragments failed 0
End-to-End Reassembly Statistics
fragments received 220
fragments reassembled 220
fragments dropped 0
fragments timeout 0
fragments reordered 0
RELEASE HISTORY
Release 2.3: command was introduced.