Alcatel-Lucent OmniAccess 5740 - Show Queuing Interface

show queuing interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
917
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW QUEUING INTERFACE
show queuing interface [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the interfaces to which the QoS service policy is attached and
the name/direction of the policy.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# show queuing interface GigabitEthernet 3/0
interface GigabitEthernet3/0
service-policy in p1
description p1 is the name of the policy map
class c1
priority
shape committed-rate 90000 committed-burst 6000
police committed-rate 9600 commit-action drop committed-burst 1500 exceed-a
queue-limit 155
random-detect ip-dscp 0 min-thresh 50 max-thresh 150
Parameter Description
interface name Name of the Interface with its slot/port
number.