aaa authentication username-prompt
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
45
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
AAA AUTHENTICATION USERNAME-PROMPT
aaa authentication username-prompt <prompt-text>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
customize the text, which is displayed to request the user trying to log in, to enter
his user name. The default username-prompt is "Username:". The 'no' command
brings the default back into effect.
PARAMETERS
EXAMPLE
ALU(config)# aaa authentication username-prompt u1
AAA PRE-AUTHENTICATION BANNER
aaa authentication banner <delimiter> <multi-lined string>
<delimiter>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
enter a descriptive message to be displayed before the user is asked for user-
name and password credentials.
PARAMETERS
EXAMPLE
ALU(config)# aaa authentication banner @Only authorized access
permitted.@
Parameter Description
prompt-text The text to be used as prompt for the
user name.
Parameter Description
delimiter Delimiting character to start the
message. This character will not appear
in the message to be displayed.
multi-lined string The message to be displayed before the
user is asked for user-name and
password credentials. (You can enter a
multi-lined descriptive message.)
delimiter Used delimiting character to end the
message.
To Next Page
Loading...
