Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Link Fragmentation and Interleaving (LFI)
Left running head:
Chapter name (automatic)
390
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
LFI CONFIGURATION ON FR CLI COMMANDS
This section deals with the commands relevant to LFI configuration on FR
interface.
FRAGMENT-SIZE
frame-relay fragment <40-1600> end-to-end
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is used
to configure the fragment size. Minimum fragment size is 40.
PARAMETERS
DEFAULT VALUE
The default fragment size is 0. In this case, no fragmentation can be performed.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if Serial0/0:0)# frame-relay fragment 80 end-to-end
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
40-1600 Specifies the fragment size.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English