System Configuration and Monitoring
Left running head:
Chapter name (automatic)
142
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SNMP-SERVER VIEW
snmp-server view <view-name> <MIB-family-name> {included|
excluded}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a SNMP view.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# snmp-server view view123 .1.3.6.1 included
RELEASE HISTORY
Release 2.3: command was added.
Parameter Description
view-name A name representing the MIB view.
MIB-family-name Represents MIB view sub tree
associated with the view name.
included When this option is selected, the MIB
family is excluded from the view.
excluded When this option is selected, the MIB
family is included from the view.
To Next Page
Loading...
