eth-ais interval
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
343
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ETH-AIS INTERVAL
eth-ais interval {1s|60s}
DESCRIPTION
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to configure the AIS frame periodicity in seconds
PARAMETERS
DEFAULT VALUE
The default AIS interval is 1 second.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc-mep)# eth-ais interval 60s
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1s|60s Specify the AIS transmission period (in
seconds).