hostname
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
61
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
HOSTNAME
hostname <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the system name.
By default the system name is “ALU”. To give the system a more informative
name, use the hostname command.
PARAMETERS
EXAMPLE
ALU(config)# hostname alcatel-lucent
HTTP
http {enable|disable}
DESCRIPTION
This command is entered in the Configuration Mode. Use this command to
enable/disable the HTTP service.
PARAMETERS
EXAMPLE
ALU(config)# http enable
Parameter Description
hostname Host name of the router.
Parameter Description
enable Enable HTTP service.
disable Disable HTTP service.
To Next Page
Loading...
