Alcatel-Lucent OmniAccess 5740 - Switchport Access Vlan; Switchport Hybrid Native Vlan

switchport access vlan
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
195
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SWITCHPORT ACCESS VLAN
switchport access vlan <2-4094>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to configure VLANs for access mode in the range 2-4094.
PARAMETERS
EXAMPLE
ALU(config-if switchport1/0)# switchport access vlan 10
SWITCHPORT HYBRID NATIVE VLAN
switchport hybrid native vlan <2-4094>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to configure Native VLAN for hybrid mode in the range 2-4094.
PARAMETERS
EXAMPLE
ALU(config-if switchport0/0)# switchport hybrid native vlan 7
Parameter Description
2-4094 The VLAN ID configured.
Parameter Description
2-4094 The VLAN ID configured.