Alcatel-Lucent OmniAccess 5740 - System Access

package backup
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
81
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PACKAGE BACKUP
package backup {fpkey:|ftp:|tftp:|user:|vrf <vrf-name>}
DESCRIPTION
This command is entered in the Configuration Mode. Backs up the default
package at a given destination. The backup file can be stored in user area or
fpkey. It can also be sent to a remote location using ftp or tftp or through an
interface associated with the specified VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# package backup ftp:
Remote Host : 10.91.2.87
Remote Port [ Enter for default ] :
Path : backup-alu-apps.740.3.0.0.82.0.npm
Username [Enter for none] : user1
Password :
Backing up Applications package... Creating...
Uploading file. This could take a while...Completed.
RELEASE HISTORY
Release 2.3: parameter vrf <vrf-name> was added.
Parameter Description
fpkey: Backup the default package to fpkey.
ftp: Backup the default package to a remote
location using ftp.
tftp: Backup the default package to a remote
location using tftp.
user: Backs-up the default package in user
area.
vrf-name Backup the default package to a remote
location through an interface associated
with the specified VRF.