Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Quality of Service
Left running head:
Chapter name (automatic)
908
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-qos-P1-C1)# set ip dscp af11
RELEASE HISTORY
Release 2.3: Parameter {fr-becn|fr-de|fr-fecn|vlan 1p} was added.
SHAPE
shape committed-rate <8000-10000000> committed-burst <40-
200000> peak-rate <8000-10000000> excess-burst <40-200000>
DESCRIPTION
This command is entered in the Class Mode. This command sets QoS shaping
parameters on the policy map’s traffic class.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-qos-P1-C1)# shape committed-rate 500000
committed-burst 7812
Parameter Description
8000-10000000 Shape Committed Rate
40-200000 Shape Committed Burst
8000-10000000 Shape Peak Rate
40-200000 Shape Excess Burst

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English