System Configuration and Monitoring
Left running head:
Chapter name (automatic)
118
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW LOGGING PRIORITY
show logging priority [<0-7> |alerts|critical|debugging
|emergencies|errors|informational|notifications|warnings]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the log messages of specified priority and higher (numerically lower).
PARAMETERS
DEFAULT VALUE
Default priority is 7.
EXAMPLE
The following example shows messages of priority 3 or higher.
ALU
> show logging priority 3
2005 Oct 13 04:41:30:%MIM-1-LOG:Interface GigabitEthernet3/0,changed state to down
2005 Oct 13 04:41:30: %MIM-1-LOG: Line protocol on Interface
GigabitEthernet3/0, changed state to down
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
The following example shows only the messages with priority 3.
ALU
> show logging priority 3 exact
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
Parameter Description
0-7 Range of priority level.
To Next Page
Loading...
Need help?
General
