Alcatel-Lucent OmniAccess 5740 - Ping

Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
650
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PING
ping [vrf <vrf-name>] {<ip-address>|<hostname>}
DESCRIPTION
This command is entered in the Configuration Mode. Ping command is used for
testing connectivity.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ping vrf ALU-vrf 1.2.3.1
RELEASE HISTORY
Release 2.3: parameter vrf <vrf-name> was added.
Parameter Description
vrf-name If the VRF name is specified, the packets will
be routed using the routing table of the
specified VRF on a interface associated with
the VRF.
ip-address IP address of remote host/router.
hostname Host name of the remote host/router.