Alcatel-Lucent OmniAccess 5740 - PIM Configuration Commands; Clear Ip Pim Neighbor; Clear Ip Pim State-Info

Multicast Routing
Left running head:
Chapter name (automatic)
606
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PIM CONFIGURATION COMMANDS
CLEAR
IP PIM NEIGHBOR
clear ip pim neighbor {*| <interface-name> {[neighbor-
address]|*}}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears the neighbor information on an interface.
PARAMETERS
EXAMPLE
ALU# clear ip pim neighbor GigabitEthernet 3/0 1.1.1.1
CLEAR IP PIM STATE-INFO
clear ip pim state-info [<group-address>] [<source-address>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears the SG State information.
PARAMETERS
EXAMPLE
ALU# clear ip pim state-info
Parameter Description
* Clears all neighbor information.
interface-name Clears neighbor information on the specified interface.
neighbor-address Clears the specified neighbor information.
Parameter Description
group-address Address of the multicast group.
source-address Clears the PIM states of the specified source (S) for given
group (G) i.e. (S,G) states.