Alcatel-Lucent OmniAccess 5740 - Neighbor Activate; Neighbor Advertisement-Interval

Border Gateway Protocol
Left running head:
Chapter name (automatic)
510
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR ACTIVATE
neighbor {<ip-address>|<peer-group-name>} activate
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command enables the exchange of information with specified neighbor.
PARAMETERS
DEFAULT
By default, neighbor is activated when configured.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 activate
NEIGHBOR ADVERTISEMENT-INTERVAL
neighbor {<ip-address>|<peer-group-name>} advertisement-
interval <0-600>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command sets the minimum interval between the sending of BGP routing
updates.
PARAMETERS
DEFAULT
30 seconds for external peers and 5 seconds for internal peers.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 advertisement-
interval 77
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
0-600 Specify the time in seconds.