Filter and Firewall
Left running head:
Chapter name (automatic)
732
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FIREWALL SESSION PROTO
show firewall session [proto {gre|tcp|udp|icmp}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the firewall sessions with respect to the protocol type.
PARAMETERS
EXAMPLE
The following syntax is used to view the details of firewall session with respect to
ICMP protocol:
ALU(config)# show firewall session proto icmp
ID 70 ICMP timeout 19 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
Parameter Description
proto Protocol type.
gre Shows the session details for GRE
protocol only.
tcp Shows the session details for TCP
protocol only.
udp Shows the session details for UDP
protocol only.
icmp Shows the session details for ICMP
protocol only.
To Next Page
Loading...
Need help?
General
