IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
818
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NHRP
nhrp <object-name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach a configured NHRP object to the interface.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if Tunnel1)# nhrp alu-dmvpn
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
object-name Name of the NHRP object.
To Next Page
Loading...
