Alcatel-Lucent OmniAccess 5740 - Neighbor Prefix-List

Border Gateway Protocol
Left running head:
Chapter name (automatic)
520
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR PREFIX-LIST
neighbor {<ip-address>|<peer-group-name>} prefix-list <name>
{in|out}
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command filters the updates to and from the BGP neighbor.
PARAMETERS
DEFAULT
No BGP neighbor is specified.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 prefix-list PL1 in
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of the BGP peer group.
name Name of a prefix list.
in Access list is applied to incoming advertisements from that
neighbor.
out Access list is applied to outgoing advertisements to that
neighbor.