Multicast Routing
Left running head:
Chapter name (automatic)
620
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IGMP CONFIGURATION COMMANDS
IP
IGMP ACCESS-GROUP
ip igmp access-group {<1-99>|<access-list-name>}
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to deny groups, which are not permitted by access-lists. This restricts the
host on a subnet joining only multicast groups that are permitted by access-lists.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# ip igmp access-group 10
IP MULTICAST-ROUTING
ip multicast-routing
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
enables multicast routing and forwarding on the OmniAccess 5740 USG.
PARAMETERS
None.
DEFAULT
Disabled by default.
EXAMPLE
ALU(config)# ip multicast-routing
Parameter Description
1-99 Access list number.
access-list-name Standard access list name.
To Next Page
Loading...
Need help?
General
