Alcatel-Lucent OmniAccess 5740 - Ip Pim Spt-Threshold

ip pim spt-threshold
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
613
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP PIM SPT-THRESHOLD
ip pim spt-threshold {<0-4294967>|infinity} [group-list {<1-
99>|<1300-1999>|<standard access-list-name>}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the SPT threshold value.
PARAMETERS
DEFAULT VALUE
Switch to SPT just after receiving first packet. That means ‘0’ Kbps.
EXAMPLE
ALU(config)# ip pim spt-threshold 100 group-list 10
Parameter Description
0-4294967 Traffic rate in kilobytes per second.
infinity Threshold is configured as infinity, which means never to
switch-over from RPT to SPT.
1-99 Standard access-list number.
1300-1999 Standard access-list number (expanded range).
standard access-
list-name
Name of a specific access list.