network
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
473
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NETWORK
network <network-number>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
associates a specific network with a RIP routing process.
PARAMETERS
EXAMPLE
ALU(config-router rip)# network 10.0.0.0
NEIGHBOR
neighbor <neighbor-address>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
defines a neighboring router to exchange the routing information.
PARAMETERS
DEFAULT VALUE
No neighboring routers are defined.
EXAMPLE
ALU(config-router rip)# neighbor 172.19.3.1
Parameter Description
network-number Network number
Parameter Description
neighbor-address IP address of a peer router with which routing information
will be exchanged.
To Next Page
Loading...
