Alcatel-Lucent OmniAccess 5740 - Match-List

match-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
405
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
MATCH-LIST
match-list <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a match-list. This enters Match-list Configuration mode.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# match-list test
ALU(config-match-list-test)#
Parameter Description
name Name of the match-list being configured.