Alcatel-Lucent OmniAccess 5740 - Aaa Services; Aaa Server-Group Radius

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
48
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
AAA SERVICES
aaa services
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
enable the AAA services.
PARAMETERS
None.
EXAMPLE
ALU(config)# aaa services
AAA SERVER-GROUP RADIUS
aaa server-group radius <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a RADIUS server group. This command enters the RADIUS Server-
Group mode.
Note: You cannot enter a RADIUS server group as ‘local’ or ‘enable’, as they are reserved
keywords for pre-defined authentication methods.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# aaa server-group radius rad1
ALU(config-srv-grp-rad1)#
Parameter Description
name Name of the RADIUS server group.