Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Border Gateway Protocol
Left running head:
Chapter name (automatic)
524
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR SHUTDOWN
neighbor {<ip-address>|<peer-group-name>} shutdown
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command administratively shuts down a neighbor or peer group.
PARAMETERS
DEFAULT
None.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 shutdown
NEIGHBOR SOFT-RECONFIGURATION INBOUND
neighbor {<ip-address>|<peer-group-name>} soft-reconfiguration
inbound
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command configures the software to start storing the updates from the
neighbor.
PARAMETERS
DEFAULT
By default, soft re-configuration is disabled.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 soft-
reconfiguration inbound
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
Parameter Description
ip-address IP address of the BGP-speaking neighbor.
peer-group-name Name of a BGP peer group.
inbound Store incoming updates.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English