Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
366
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW ETH-CFM MEP - LOOPBACK AND LINKTRACE
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535> {loopback|linktrace}
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays the MEP, MA's, MD's, stored link trace and loopback information.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100 linktrace
---------------------------------------------------------
MEP Information
---------------------------------------------------------
md_Index: 100
ma_Index: 100
mep_Index: 10
Interface Name: GigabitEthernet 3/0 AdminState: Up Direction: Down
MacAddress: 00e0.b1c6.df2a
CCM Enable: Enabled
CCM/LTM Priority: 0 CcmTx: 79559 CcmSequenceErr: 32
AlarmSet Time: 250 AlarmReset Time: 250
LowestPrior Defect: DefMACstatus DefRemoteCCM DefErrorCCM DefXconCCM
HighestDefect: DefNone
Defect Flags: DefNone
AIS-Enable: Disabled
AIS Priority: 1 AIS Interval: 1 AIS Level: 0
---------------------------------------------------------
MEP Linktrace Message Information
---------------------------------------------------------
LtRxUnexplained: 0 LtNextSequence: 2
LtStatus: False LtResult: False
TargIsMepId: False TargMepId: 10
EgressId: 0000:00e0:b1c6:df2a
TargMac: 0000:0000:0000
TTL: 64 SequenceNum: 1
LtFlags: UseFDBonly
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English