Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Filter and Firewall
Left running head:
Chapter name (automatic)
700
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO L2 FILTER {IN|OUT}
no l2 filter {in|out} <filter-name>
This command is entered in the Interface Configuration Mode. This command
detaches a L2 filter attached to an interface. This does not delete the filter
definition in its entirety. It only detaches it from the interface it is attached to.
NO RULE
no rule <line number>
This command is issued in the Filter Configuration Mode. The command deletes a
single component in the filter with respect to the corresponding line number.
NO STATELESS
no stateless
This command is entered in the Filter Configuration Mode. It changes the stateless
option configured on the firewall, to the default state which is stateful or reflexive.
RENUMBER
renumber
DESCRIPTION
This command is entered in the Filter Configuration Mode. Use this command to
generate a numbering scheme for the filter rules configured.
PARAMETERS
None.
EXAMPLE
ALU(config-filter-f1)# renumber

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English