Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
342
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
ETH-AIS
eth-ais {enable|disable}
DESCRIPTION
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to enable/disable AIS.
PARAMETERS
DEFAULT VALUE
By default, the ETH-AIS will be disabled.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc-mep)# eth-ais enable
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
enable|disable Enable/disable ETH-AIS.
To Next Page
Loading...
